Hi.
OK let's start.once againg i repeat This Guide is for OTB 1.1.2 Means for Week 45+ not for OTB 1.1.3 i am working for OTB 1.1.3 also but i right now only 1.1.2.I will not take any gurentee for any DAMAGE or if u make a Ibrick.
1.Things you need.
Actuall it's like H/w unlock but now you dont need to Open your Iphone. Means no Strachs. or Tacking out your cover.
OK.
2.Take your Iphone DOCK not Iphone cable.I repeat Iphone OEM (Original) DOCK.
3.Now you need a 2 pieace of little wire i use telephone wire works great.
4.Now you need to short 4 pins to geather I will Upload pic.But you have to give some time to it.
5.Now you need 1 Sterio PIN. Insert it into Dock back sterio pin connector so that you can get to power 1.5 volt. Rember in this point you need to use GND and center pin not back and short to Dock connector pins.
*******************************************************************
MAIN THING'S
Start with CUT DOCK SIDE means Sterio Pic connector back side .
9th PIN SHORT to 2nd PIN
6th PIN Short to 9th PIN
NOW when you done
Hook your Iphone to DOCK and done.
Now take sterio Pin and use it as a Switch.
when you short Sterio pin GND and middle pin to geather It work's like when you Open your ipone and attach and USE TRACE A17.
So all GOOD and WORKS 100% ....I have tested on 6 Iphone and all time works like charm
Don't worry if it will not get Short you juzz see TP not connected. Give some time it will work.I have 1st tested it on 6 Iphone and always work.
5.Once you Done the Prepration all you need to do is Run the 1.1.2 Unlocking GUIDE.
